Automotive

AI visual inspection for automotive parts

Welds, trim materials, seals and assemblies checked at line speed, every part, every shift. Built for Tier 1 and Tier 2 suppliers who cannot afford an escape.

Test it on your parts +39 049 825 6850

Free test on 20 parts
Results in 5 to 7 days
Running in one day
From €1,200/mo, no CAPEX

Engine bay under inspection with components boxed as OK in green and NG in red — OK 92% · NG 87%

What it checks

The defects that cost automotive producers the most.

Trained on your parts, with your OK and NG examples. Each decision is stored with its image.

Weld porosity and cracks
Missing O-rings and clips
Surface scratches and dents
Trim and textile defects
Connector and hose fitment
Label and marking presence

Welder at work in a shower of sparks — Weld seam

Hands connecting a wiring harness to a car speaker on an assembly line — Manual assembly

Hose and bracket detected after a barcode scan, with a checklist of required parts — Barcode + parts

Why it matters

Where manual inspection breaks down.

The same three problems come up on almost every first call in this sector.

01
Escapes cost the contract

One defective part at the customer's line means a containment, a sort and a scorecard hit. Sampling does not protect you from that.
02
Inspectors get tired

Manual checks drift after the first hours of a shift. The camera sees the thousandth part the way it saw the first.
03
PPAP wants evidence

Every decision is stored with its image, so a claim or an audit is answered with a picture, not a signature.

Case study · Alcantara

Premium automotive material: defect detection from 85% to 99.8%

defect detection: 99.8%; defect detection
saved per year: €240k; saved per year
field escapes in 6 months: 0; field escapes in 6 months

Read the full case

How it works

From your parts to a running station in three steps.

No machine vision engineers on your side, and no CAPEX: hardware, software, installation and support are one monthly fee.

1
Free test

Send about 20 good and defective parts or high-res photos. We train a model and report detection rate, false positives and cycle time in 5 to 7 days.
2
Install in one day

Camera, lighting and edge PC mounted at your station. Operators see OK or NG, with the defect marked on the image.
3
Improve every week

Every result is logged. When your parts or specs change, we retrain the model as part of the plan.

Applications

AI vision in automotive, in detail.

Questions

What automotive teams ask first.

Rather talk it through? Call +39 049 825 6850 or write to info@logirobotix.com.

Can it keep up with our takt time?

Yes. Decisions come back in well under a second per part, so the check runs inline at the station instead of at the end of the line.

Does it connect to our MES?

Results can be pushed to MES or ERP with the part ID and the image. Custom integrations are part of the Custom AI Vision Services plan.

What do you need for the free test?

About 20 good and defective parts, or high-resolution photos of them. You get detection rate, false positives and cycle time in 5 to 7 days.

Free feasibility test

Test it on your parts.

Send us 20 defective parts or high-res photos. We train a model on your parts and show you detection rate, false positives and cycle time before you sign anything.

parts or photos: 20; parts or photos
days to results: 5-7; days to results
no commitment: €0; no commitment